KM capacitors marked H30, or D, or E, coated with a compound of red, red, green, yellow.
The pins (legs) must be cut to fit the very case of the capacitor

KM capacitors SMD, NOT MAGNETIC

SMD tantalum capacitors

Capacitors k10-7v and similar "flags"
Ends do not need to be cut!
ATTENTION! Prices for electronic elements manufactured before 1990 , since 90. -10%; since 2000 -20%!

Capacitors K10-26
The pins (legs) must be cut to fit the very case of the capacitor

Capacitors KM-3 (4,5), painted green (rarely blue), with the following markings: "3", "4" or "5" on the capacitor itself.
Possible designations: 5F, 5M, 5N, 5U, 5P, 5M 3F, 3U, 4M, 4N, 4V, etc.
These are the most common KM markings in green, there are other designations for KM capacitors, which we also purchase. Capacitors with the designation H30, D, E, 5V are not included in this group

Capacitors KM-3 (4,5,6), coated with a compound of red, red, green, yellow.
Capacitors marked H30, H50, D, E, with the numbers "1" or "2" at the beginning of the marking are not included in this group.
The pins (legs) must be cut to fit the very case of the capacitor

Condensers KM-6 with a nominal value of 2.2 µF, covered with a compound of red, red, green, yellow.
Designations: 2M2, 2µ2.
The date of issue should be indicated in NUMBERS (eg 0185 or 03-71), and not with a letter number (eg U9 or V7) - these are newer capacitors, belong to the general group


<h2>The pins (legs) must be cut to fit the very case of the capacitor.</h2>

KM capacitors marked H50, coated with a compound of red, red, green, yellow.
The pins (legs) must be cut to fit the very case of the capacitor

K53-16 capacitors of any size.
The leads (legs) must be cut to fit the very case of the capacitor.
Similar K53-21 DO NOT ACCEPT !!!

Capacitors K10-17, K10-23 in a plastic case of different colors. Externally, they look like an inverted house, when "biting through" inside you can find a ceramic multilayer capacitor body with a characteristic mother-of-pearl sheen.
The pins (legs) must be cut to fit the very case of the capacitor

Capacitors KM-5, painted green, marked 5V and rated 1n8 or more.
The pins (legs) must be cut to fit the very case of the capacitor

Capacitors similar to K53-1 non-USSR.
The price depends on the size.
The leads (legs) must be cut to fit the very case of the capacitor

Capacitors similar to K10-17 in a ceramic case are imported.
When "biting through" inside, you can find a ceramic multi-layer capacitor body with a characteristic mother-of-pearl sheen.
Upon acceptance, a spectral analysis is carried out for the Pd / Pt content.

Capacitors ETO-4 or K52-5
The price depends on the size

Capacitors K10-48.
When "biting through" inside, you can find a ceramic multi-layer capacitor body with a characteristic mother-of-pearl sheen.
The pins (legs) must be cut to fit the very case of the capacitor.

Tantalum capacitor anodes, clean and dirty.
ATTENTION!!! Tantalum anodes are easily confused with niobium anodes. A distinctive feature of tantalum is the body of the anode and the leg (output) of the same color, in niobium - different

Capacitors similar to K10-17 in a plastic case not USSR.
When "biting through" inside, you can find a ceramic multi-layer capacitor body with a characteristic mother-of-pearl sheen.
Upon acceptance, a spectral analysis is carried out for the Pd / Pt content.

KM-6 capacitors with a nominal value of 0.68-1.5 µF, coated with a compound of red, red, green, yellow.
Designations: µ68, M68, 1M0, 1µ0, 1M5, 1µ5.
The date of issue must be indicated in NUMBERS (eg 0185 or 03-71) and not in a letter number (eg U9 or V7) - general group.
The pins (legs) must be cut to fit the very case of the capacitor

Capacitors K10-17 in a compound, usually yellow or blue.
NON-MAGNETIC!
When "biting through" inside, you can find a ceramic multi-layer capacitor body with a characteristic mother-of-pearl sheen.
The pins (legs) must be cut to fit the very case of the capacitor

Capacitors K53-18
The price depends on the size
The leads (legs) must be cut to fit the very case of the capacitor.
Similar K53-4 and K53-14 DO NOT ACCEPT !!!

Capacitors K52-2S, K52-5S, K52-5SV black cover - quite rare capacitors marked K52-2S and K52-5S.
The difference from conventional capacitors of the K52-2, K52-5 series is the addition of the letter "C" to the K52-2 and K52-5 marking.
There are also capacitors with the designation K52-2 SV, K52-5 SV, the letter "B" means "all-climatic performance". There is no difference for the price.
Since 1995 minus 5% of the price on the website

Capacitors K53-1, K53-1A
The price depends on the size
The pins (legs) must be cut to fit the very case of the capacitor.
Similar K53-4 and K53-14 DO NOT ACCEPT !!!

Microcircuits UPCHZ-1M in an aluminum case with KM capacitors inside
ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

Capacitors similar to K52-2, K52-5 small size not USSR

Large capacitors K52-②, K5②-2 (two in a circle), as well as without a rhombus (export version)

KM capacitors on a ceramic base

K53-28 capacitors of any size.
The leads (legs) must be cut to fit the very case of the capacitor.

Capacitors similar to k52-1 produced by "Tesla", Czechoslovakia
The leads (legs) must be cut to fit the very case of the capacitor

Capacitors similar to k52-1 non-USSR.
The leads (legs) must be cut to fit the very case of the capacitor

Small capacitors ETO-1, ETO-S, K52-2, K52-5
Except К52-② (two in a circle)

Capacitors k52-1M or k52-1BM of any size.
The pins (legs) must be cut to fit the very case of the capacitor.

K53-6 capacitors of any size.
The leads (legs) must be cut to fit the very case of the capacitor

Capacitors K21-9 marked 8, 11, 47, M47, 220, M220, 330, M330 and the like
This type of capacitor can be confused with the more expensive KM-3,4,5 capacitors. Their difference is the thicker body (over 1.5mm). In addition, when cutting, white layered ceramics can be found inside, in contrast to the beige-brown crystal inside the KM capacitors.
Ends do not need to be cut!

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

KLS capacitors and similar
Ends do not need to be cut!
ATTENTION! Prices for electronic elements manufactured before 1990 , since 90. -10%; since 2000 -20%!

Capacitors KSO and similar
Ends do not need to be cut!
ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

Microcircuits of the K224 series in an aluminum case with KM capacitors inside
ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

Capacitors KT-1, 2, KTK and similar "tubular"
Ends do not need to be cut!
ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!