If the ends are cut short - 50% discount !!!
Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

6P-100A plug, yellow contacts inside the connector
Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the 6P-100A plug, keep the markings on the body intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to unsolder or break the 6P-100A plug out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

Panels for microchips such as RS-16, 24, 28, 40, etc. with gold plated contacts. Price per contact.
To find out the price for a connector, you need to multiply the price per contact by the number of contacts.
No need to disassemble connectors!
Connector prices before 1990., from 1990. -10%, from 2000. -20%

RPS1-7G, RPS1-37G plug or socket
Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

Number of contacts 1, 36, 40

Plugs type RS, ONC, SNC with gold-plated contacts. Price per contact.
To find out the price for a connector, you need to multiply the price per contact by the number of contacts.
No need to disassemble connectors!
Connector prices before 1990., from 1990. -10%, from 2000. -20%

Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

Connectors made in Bulgaria, Hungary, Poland, Czechoslovakia, GDR until 1990
These connectors were manufactured under the brands ELTRA, TESLA, RTF, TAN-2, etc.
They can be in different designs - fully or partially gold-plated.
Connectors must be free of wires and heavy fasteners

Sockets type RS, ONC, SNC with gold-plated contacts. Price per contact.
To find out the price for a connector, you need to multiply the price per contact by the number of contacts.
No need to disassemble connectors!
Connector prices before 1990., from 1990. -10%, from 2000. -20%

Sockets type RM, RSh with gold-plated contacts. Price per contact.
To find out the price for a connector, you need to multiply the price per contact by the number of contacts.
No need to disassemble connectors!
Connector prices before 1990., from 1990. -10%, from 2000. -20%

Plugs type RM, RSh with gold-plated contacts. Price per contact.
To find out the price for a connector, you need to multiply the price per contact by the number of contacts.
No need to disassemble connectors!
Connector prices before 1990., from 1990. -10%, from 2000. -20%

Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

Gold-plated contacts from connectors, freed from foreign material (plastic, wires, etc.)
The price of contacts depends on the thickness of the base - the thicker the base, the lower the gold content, respectively, the lower the price.
Also, contacts can be fully gold-plated or partially, which also affects the price.
Separate contacts by appearance before sending, this will allow us to quickly and accurately determine their price.
It is not recommended to disassemble connectors made in the USSR / RF - the gold content in these products is higher than in the others, but after disassembly it is not possible to identify them. Send connectors made in the USSR / RF unassembled!

Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company.

Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company.

Hardware plugs with gold-plated pins USB, HDMI, DVI, VGA, DP, RJ, etc

Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company.

The price of connectors RPM7-12SH, RPM7-50G socket or plug full and the like depends on the condition (new or used), as well as on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

The price of connectors RPM23-18GSh5, RPM23-32GSh5 full socket depends on the condition (new or used), as well as on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company