Pd 58%

The price of connectors CHO63-16, CHO63-32, CHO63-48, CHO63-56, CHO63-64, CHO63-96 and other CHO63 - the socket is completely gilded depends on the condition (new or used), as well as on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Prices for connectors made before 1990, since 1990 -10%, since 2000 -20%.
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

KM capacitors marked H30, or D, or E, coated with a compound of red, red, green, yellow.
The pins (legs) must be cut to fit the very case of the capacitor

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

Relay DP12 passports 902, 903, 906.
The price depends on the year of manufacture of the product - select in the tab.
Year of issue Content (gr.)
before 12.74. 0,55 (Au)
from 01.75. to 12.90. 0,25 (Au)
The markings, month and year of manufacture must be clearly legible.
Relays without markings or with damaged markings are preliminarily analyzed or tested for suitability.
When dismantling, be careful not to damage the marking of the relay for a more accurate and prompt calculation with you.
The content of precious metals in the DP12 relay is shown in the table above.
We accept other DP12 relays cheaper

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

The price of connectors RPPM17-48, RPPM17-52 socket and the like depends on the condition (new or used), as well as on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

KM capacitors SMD, NOT MAGNETIC

Relays RPS3, RPS4, RPS5, RPS7, RPS15 - the price depends on the year of manufacture of the product
After 1990. with yellow contacts only!

Resistors SP5-2VB, SP5-3VA are small up to 01.91.

Цена на разъемы СНП14-72, СНП14-112 и прочие СНП14- вилка полностью позолоченная зависит от состояния (новый или б/у), длины выводов, а также от количества контактов - выбирайте соответсвующие вкладки!
Цены на разъемы до 1990 г/в, с 1990 г/в -10%, с 2000 г/в -20%
При демонтаже разъёма СНП14-112 сохраняйте маркировку на корпусе целой и неповреждённой. От этого зависит цена на разъём, так как на корпусе стоит месяц и год выпуска изделия. Все разъёмы с повреждённой маркировкой, где не виден год выпуска, считаются как с 1990 года выпуска и далее. Некоторые, как с 2000 года выпуска. Можно не выпаивать и не выламывать разъём СНП14-112 из платы, а аккуратно обрезать по плате, вместе с частью платы и в таком виде привозить или отправлять посылкой в нашу компанию

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

Switches P2G3
Price for one section.
ATTENTION! Prices for electronic elements manufactured before 1990 , since 90. -10%; since 2000 -20%!

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

The price of connectors СНО58-18, СНО58-36, СНО58-54, СНО58-56, СНО58-72, СНО58-135 and other CHO58 - the locally gilded plug depends on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Prices for connectors made before 1990, since 1990 -20%, since 2000 -40%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

SMD tantalum capacitors

Relay RES34
The price depends on the passport and the year of issue - select in the tab
Passport Year of issue Content (gr.)
371-374, 380 until 01.81. 0,04 (Pt)
00-03, 09, 23-25, 34 from 1982. till 1989. 0,04 (Pt)
21, 22, 26-28 from 1982. till 1989. 0,02 (Pt)
The main thing is that the marking, month and year of release are clearly read on each relay. Relays RES34 without marking or with damaged marking are preliminarily analyzed or tested for suitability. When dismantling, be careful not to damage the marking of the relay for a more accurate and prompt calculation with you.
The content of precious metals in the RES 34 relay differs and depends on the relay passport. Above is a table of the content of precious metals in this relay, depending on the passport and year of manufacture. Relays with the date of manufacture after those indicated in the table may also be suitable for sale. But we can definitely tell you about this only after analyzing the relay. This requires, of course, the products themselves and some time.
We accept other RES34 relays cheaper

Relay RES32
The price depends on the passport and the year of issue - select in the tab
Passport Year of issue Content (gr.)
single 354, 355 before 01.82. 0,36 (Au)
separate 06, 07 before 01.90 0,17 (Au)
Suitable RES32 relays with gold contacts come with two types of passports: single, example RF4500355 and separate, example 335-06 01.
In a single passport, you should look at the last three digits, in a separate passport - the fourth and fifth digits.
How to correctly determine the appropriate passport of the RES32 relay is shown in detail in the photo of the relay.
The content of precious metals in the RES32 relay is different and depends on the passport.
The table above shows all contents of precious metals.
We accept other RES32 relays cheaper

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

KD906A and similar 8 pins
ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward.

If the ends are cut short - 50% discount !!!
Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

Lamp GS-15B (generator tetrode) until 1988 or with the number "5" in an star/romb
80 mg Pd

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

6P-100A plug, yellow contacts inside the connector
Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the 6P-100A plug, keep the markings on the body intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to unsolder or break the 6P-100A plug out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

ATTENTION! Prices for electronic elements manufactured before 1990 , since 90. -10%; since 2000 -20%!

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

The price of connectors СНП59-16, СНП59-32, СНП59-48, СНП59-64, СНП59-69, СНП59-96 and other SNP59 - the locally gilded socket depends on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Prices for connectors made before 1990, since 1990 -20%, since 2000 -40%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

The price of connectors SNP58-18, SNP58-36, SNP58-54, SNP58-60, SNP58-72, SNP58-96 and other SNP58 - the locally gilded socket depends on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Prices for connectors made before 1990, since 1990 -20%, since 2000 -40%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

The price of connectors SNP58-18, SNP58-36, SNP58-54, SNP58-60, SNP58-72, SNP58-96 and other SNP58 - the locally gilded socket depends on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Prices for connectors made before 1990, since 1990 -20%, since 2000 -40%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

The price of connectors SNP58-18, SNP58-36, SNP58-54, SNP58-60, SNP58-72, SNP58-96 and other SNP58 - the locally gilded socket depends on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Prices for connectors made before 1990, since 1990 -20%, since 2000 -40%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

The price of connectors SNP34-18, SNP34-28, SNP34-36, SNP34-56, SNP34-72, SNP34-84 and other SNP34 - the locally gilded plug depends on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector


<h2>Prices for connectors made before 1990, since 1990 -20%, since 2000 -40%</h2>


<h2>When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company.</h2>

The price of connectors SNP58-18, SNP58-36, SNP58-54, SNP58-60, SNP58-72, SNP58-96 and other SNP58 - the locally gilded socket depends on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Prices for connectors made before 1990, since 1990 -20%, since 2000 -40%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company