Capacitors ETO-4 or K52-5
The price depends on the size

Relays RPS11 / 3, RPS11 / 4, RPS11 / 5, RPS11 / 7 - the price depends on the year of manufacture of the product - select in the tab.
After 1990. with yellow contacts only!
Year of issue Content (gr.)
until 01.68. 0,14 (Pt)
01.68.-12.71. yellow contacts 0,025 (Au)
The markings, month and year of manufacture must be clearly legible. Relays without markings or with damaged markings are preliminarily analyzed or tested for suitability. When dismantling, be careful not to damage the marking of the relay for a more accurate and prompt calculation with you.
The content of precious metals in the RPS-11/3, 11/4, 11/5, 11/7 relays is shown in the table above.
We accept other RPS-11/3, 11/4, 11/5, 11/7 relays cheaper

Textolite without legs With or WITHOUT metal plate

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

Silver alloy contacts of switches non-magnetic.
Tungsten-Silver Carbide (WCAg) contacts do not fit into this category.
If there is a large amount of solder residues, a discount may apply

Capacitors K10-48.
When "biting through" inside, you can find a ceramic multi-layer capacitor body with a characteristic mother-of-pearl sheen.
The pins (legs) must be cut to fit the very case of the capacitor.

Tantalum capacitor anodes, clean and dirty.
ATTENTION!!! Tantalum anodes are easily confused with niobium anodes. A distinctive feature of tantalum is the body of the anode and the leg (output) of the same color, in niobium - different

Relay REK 43 passport 0101,0201,0202, 0301,0302,0304, 0305,1602,2202, 2302,6102,0802
We accept other relays REK43 at a cheaper price

Capacitors similar to K10-17 in a plastic case not USSR.
When "biting through" inside, you can find a ceramic multi-layer capacitor body with a characteristic mother-of-pearl sheen.
Upon acceptance, a spectral analysis is carried out for the Pd / Pt content.

KM-6 capacitors with a nominal value of 0.68-1.5 µF, coated with a compound of red, red, green, yellow.
Designations: µ68, M68, 1M0, 1µ0, 1M5, 1µ5.
The date of issue must be indicated in NUMBERS (eg 0185 or 03-71) and not in a letter number (eg U9 or V7) - general group.
The pins (legs) must be cut to fit the very case of the capacitor

2D908A and similar 12 pins
ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

RPS1-7G, RPS1-37G plug or socket
Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

Capacitors K10-17 in a compound, usually yellow or blue.
NON-MAGNETIC!
When "biting through" inside, you can find a ceramic multi-layer capacitor body with a characteristic mother-of-pearl sheen.
The pins (legs) must be cut to fit the very case of the capacitor

Capacitors K53-18
The price depends on the size
The leads (legs) must be cut to fit the very case of the capacitor.
Similar K53-4 and K53-14 DO NOT ACCEPT !!!

Capacitors K52-2S, K52-5S, K52-5SV black cover - quite rare capacitors marked K52-2S and K52-5S.
The difference from conventional capacitors of the K52-2, K52-5 series is the addition of the letter "C" to the K52-2 and K52-5 marking.
There are also capacitors with the designation K52-2 SV, K52-5 SV, the letter "B" means "all-climatic performance". There is no difference for the price.
Since 1995 minus 5% of the price on the website

Capacitors K53-1, K53-1A
The price depends on the size
The pins (legs) must be cut to fit the very case of the capacitor.
Similar K53-4 and K53-14 DO NOT ACCEPT !!!

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

Number of contacts 1, 36, 40

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

Microcircuits of the south and north bridges of motherboards and the like.
The price of microcircuits depends on the design.
The earlier ones are made in a plastic case with gold conductors inside. They can be with or without a radiator. They have a characteristic gilded corner.
More modern ones are a crystal on a fiber basis, with practically no visible gilding

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

Reed relays RES42, RES43, RPG2, RPG3, RPG4, RPG5, RPG6, RPG8, RPG9, RPG10 and the like

GRPPM7-90G1 socket full 90 pins
Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company.

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

Microcircuits UPCHZ-1M in an aluminum case with KM capacitors inside
ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

Relay TRM RDO passport 003,028,525, P-579

MPN-1 switches up to 12.88 onwards

P2T-1-1V switches up to 12.88

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

Switches MP12 two yellow pins
The price depends on the year of issue, choose the tab.

Relay RES10 separate passport
The price depends on the passport and the year of issue - select in the tab
Passport Year of issue Content (gr.)
031-02, 031-03, 031-04, 031-05 01.82. - 12.83. 0,037 (Pt)
031-01, 031-06, 031-07 01.82. - 12.83. 0,033 (Pt)
031-08, 031-13 01.82. - 12.89. 0,065 (Au)
031-09, 031-10, 031-11, 031-12 01.82. - 12.89. 0,06 (Au)
050-01 01.82. - 12.82. 0,06 (Pt)
050-02 01.82. - 12.89. 0,065 (Au)
The content of precious metals in the RES10 relay depends on the passport, month and year of release of the relay.
In the marking of the RES10 relay, two types of passport are accepted: single, example PC4524303 and separate, example 031-11. How to determine the appropriate passport, month and year of release of the relay is shown in detail in the photo of the relay.
Pay special attention to the safety of the pins (legs) when removing the relay from the boards. In the absence of pins (legs), the price of the RES10 relay will significantly decrease, since the content of precious metals in the relay will decrease. You can not remove these relays from the boards, but send them together with a part of the board.
Our specialists dismantle the relay themselves, the price will not change downward from this. Also, during dismantling, do not damage the marking of the RES10 relay, the price of the relay directly depends on the marking on the relay case.
Other relays RES10 separate passport we accept cheaper

Microcircuits 155 series and the like in a ceramic case must be "bite through" for the presence / absence of a gilded plate inside.
The microcircuits must be sorted:
- gold plated plate
- no visible gilding
If there is a batch of microcircuits with the same markings, release date and manufacturer, it is not necessary to bite through all the microcircuits.
For unsorted batches of microcircuits, the price is determined by the receiver by taking samples from the batch.

Plugs type RS, ONC, SNC with gold-plated contacts. Price per contact.
To find out the price for a connector, you need to multiply the price per contact by the number of contacts.
No need to disassemble connectors!
Connector prices before 1990., from 1990. -10%, from 2000. -20%

Capacitors similar to K52-2, K52-5 small size not USSR

Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward