Switch NAZ602000

Connectors GRPM, GRPP and the like with silver-plated contacts with gold-plated wire inside
Prices for connectors made before 1990., since 1990. -20%, since 2000. -40%

Resistors MLT, ULI, OMLT, S2-23
The price of resistors depends on the size, small ones are more expensive
ATTENTION! Prices for electronic elements manufactured before 1990 , since 90. -10%; since 2000 -20%!

Lamp GMI-90 (pulse generator tetrode) until 1988 or with the number "5" in an star/romb
450 mg Au

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

The price of connectors RPPM27-30, RPPM27-90 full and similar depends on the type (plug or socket), on the condition (new or used), as well as on the number of contacts - choose the appropriate tabs

Prices for connectors made before 1990., since 1990. -20%, since 2000. -40%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

Prices for connectors made before 1990., since 1990. -20%, since 2000. -40%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

Transistors, microcircuits, diodes and other electronic components with visible gilding, made in the USSR, not sorted.

Gold-plated contacts from connectors, freed from foreign material (plastic, wires, etc.)
The price of contacts depends on the thickness of the base - the thicker the base, the lower the gold content, respectively, the lower the price.
Also, contacts can be fully gold-plated or partially, which also affects the price.
Separate contacts by appearance before sending, this will allow us to quickly and accurately determine their price.
It is not recommended to disassemble connectors made in the USSR / RF - the gold content in these products is higher than in the others, but after disassembly it is not possible to identify them. Send connectors made in the USSR / RF unassembled!

Capacitors K10-26 or K10-47
The pins (legs) must be cut to fit the very case of the capacitor

Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

Capacitors KM-3 (4.5), painted green, marked H30 or D.
The pins (legs) must be cut to fit the very case of the capacitor

Capacitors ETO-3
The price depends on the size

Capacitors K52-7
The price depends on the year of manufacture

KOOP capacitors of any size.
The pins (legs) must be cut to fit the very case of the capacitor.

Relay RPA11, RPA12 until 01.1992. of release.
We accept other relays RPA11, RPA12 cheaper

Capacitors K52-2S, K52-5S, K52-5SV black cover small size - quite rare capacitors marked K52-2S and K52-5S.
The difference from conventional capacitors of the K52-2, K52-5 series is the addition of the letter "C" to the K52-2 and K52-5 marking.
There are also capacitors with the designation K52-2 SV, K52-5 SV, the letter "B" means "all-climatic performance". There is no difference for the price.
Since 1995 minus 5% of the price on the website

Resistor SP5-35A up to 01.91

Resistor SP5-39B 1W up to 01.92

Capacitors K52-9, K52-11 of any size.
The pins (legs) must be cut to fit the very case of the capacitor

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

K52-1 capacitors of any size.
The pins (legs) must be cut to fit the very case of the capacitor

Capacitors K52-, small size with a deuce in a circle

KT704,912,926 to 12.91. narrow hex (rim)

Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company.

Ceramic with gold top and bottom

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company.

Hardware plugs with gold-plated pins USB, HDMI, DVI, VGA, DP, RJ, etc

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

Transistors KT802, KT803, KT808, KT908, 2T802, 2T803, 2T808, 2T908 to 01.90.
Only these markings are suitable
KT808 AM, KT808 BM are not suitable.
We buy transistors KT802, KT803, KT808, KT908 in any condition, both new and used. The main thing is that the marking and the year of manufacture of the transistor on the element body itself are visible. Prices for transistors KT802, KT803, KT808, KT908, 2T802, 2T803, 2T808, 2T908 are the same, both for new and used ones.
Transistors manufactured after 01.1990. it is necessary to open each one and see the presence of a gilded (bright yellow) base under the crystal. We buy transistors with bases of a pale yellow or white color as scrap brass.

GS-36B lamp (generator tetrode) until 1988 or with the number "5" in an star/romb
90 mg Au

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

KT912, 944, 947, 2P904 up to 12.91

PP8 switches - yellow ends
Price per section
ATTENTION! Prices for electronic elements manufactured before 1990 , since 90. -10%; since 2000 -20%!