KM capacitors marked H30, or D, or E, coated with a compound of red, red, green, yellow.
The pins (legs) must be cut to fit the very case of the capacitor

KM capacitors SMD, NOT MAGNETIC

Capacitors K10-26
The pins (legs) must be cut to fit the very case of the capacitor

Capacitors KM-3 (4,5), painted green (rarely blue), with the following markings: "3", "4" or "5" on the capacitor itself.
Possible designations: 5F, 5M, 5N, 5U, 5P, 5M 3F, 3U, 4M, 4N, 4V, etc.
These are the most common KM markings in green, there are other designations for KM capacitors, which we also purchase. Capacitors with the designation H30, D, E, 5V are not included in this group

Capacitors KM-3 (4,5,6), coated with a compound of red, red, green, yellow.
Capacitors marked H30, H50, D, E, with the numbers "1" or "2" at the beginning of the marking are not included in this group.
The pins (legs) must be cut to fit the very case of the capacitor

Condensers KM-6 with a nominal value of 2.2 µF, covered with a compound of red, red, green, yellow.
Designations: 2M2, 2µ2.
The date of issue should be indicated in NUMBERS (eg 0185 or 03-71), and not with a letter number (eg U9 or V7) - these are newer capacitors, belong to the general group


<h2>The pins (legs) must be cut to fit the very case of the capacitor.</h2>

KM capacitors marked H50, coated with a compound of red, red, green, yellow.
The pins (legs) must be cut to fit the very case of the capacitor

Capacitors K10-17, K10-23 in a plastic case of different colors. Externally, they look like an inverted house, when "biting through" inside you can find a ceramic multilayer capacitor body with a characteristic mother-of-pearl sheen.
The pins (legs) must be cut to fit the very case of the capacitor

Capacitors KM-5, painted green, marked 5V and rated 1n8 or more.
The pins (legs) must be cut to fit the very case of the capacitor

Capacitors similar to K10-17 in a ceramic case are imported.
When "biting through" inside, you can find a ceramic multi-layer capacitor body with a characteristic mother-of-pearl sheen.
Upon acceptance, a spectral analysis is carried out for the Pd / Pt content.

Capacitors K10-48.
When "biting through" inside, you can find a ceramic multi-layer capacitor body with a characteristic mother-of-pearl sheen.
The pins (legs) must be cut to fit the very case of the capacitor.

Capacitors similar to K10-17 in a plastic case not USSR.
When "biting through" inside, you can find a ceramic multi-layer capacitor body with a characteristic mother-of-pearl sheen.
Upon acceptance, a spectral analysis is carried out for the Pd / Pt content.

KM-6 capacitors with a nominal value of 0.68-1.5 µF, coated with a compound of red, red, green, yellow.
Designations: µ68, M68, 1M0, 1µ0, 1M5, 1µ5.
The date of issue must be indicated in NUMBERS (eg 0185 or 03-71) and not in a letter number (eg U9 or V7) - general group.
The pins (legs) must be cut to fit the very case of the capacitor

Capacitors K10-17 in a compound, usually yellow or blue.
NON-MAGNETIC!
When "biting through" inside, you can find a ceramic multi-layer capacitor body with a characteristic mother-of-pearl sheen.
The pins (legs) must be cut to fit the very case of the capacitor

Microcircuits UPCHZ-1M in an aluminum case with KM capacitors inside
ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

KM capacitors on a ceramic base

Microcircuits of the K224 series in an aluminum case with KM capacitors inside
ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

Compound-coated capacitors manufactured in the CMEA countries. Unlike the Soviet ones, the compound is softer and more brittle ("clay"), but when "biting through" inside, you can find a ceramic multilayer capacitor body with a characteristic mother-of-pearl tint.
The pins (legs) must be cut to fit the very case of the capacitor

Capacitor assemblies B18-1, inside small SMD capacitors (KM)

Capacitors K10-26 or K10-47
The pins (legs) must be cut to fit the very case of the capacitor

Capacitors KM-3 (4.5), painted green, marked H30 or D.
The pins (legs) must be cut to fit the very case of the capacitor

Microcircuits UPCHZ-2 with KM capacitors inside
ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

Microcircuits of the K224 series without a case

The price depends on the version - in a metal case or without it.

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!