Two-side, one-side

Resistors PP3-40, PP3-41, PP3-42, PP3-43, PP3-44, PP3-45, PP3-46, PP3-47 black inscriptions, any year

Gold plated watches and bracelets

The price depends on the thickness of the gold plating and equipment (with or without a mechanism)

Bracelets from watches with a hallmark are assessed as watches without a mechanism.

If the items show signs of severe wear, a discount may apply, and the discount is also applied to massive cases.

Produced in the USSR, the gilded watch cases are marked with two letters "Au", after the letters there were numbers: 5, 10, 20, 25, indicating the thickness of the gold coating in microns. For example: AU10, or Au-20. There are rare markings in the form of the inscription Au-12.5 or Au10 , sometimes instead of Au10 , the inscriptions AUX, or Au10 = were put.

There were only markings of the letters "Au", but in a frame in the form of a square or a rhombus, such stamps with a square and a rhombus denoted a gold plating 20 microns thick.

If the watch case has only the letters "Au", no numbers, then the coating will be 5 microns.

Watches and other gilded jewelry (cufflinks, brooches, rings, earrings, chains, pendants, etc.) without a brand are evaluated based on spectral analysis at the time of acceptance

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

2D917A and similar 1 surface 12 pins
ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

ALS317A LEDs 6 pins
ATTENTION! Prices for electronic elements manufactured before 1990 , since 90. -10%; since 2000 -20%!

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

The price of connectors СНО59-16, СНО59-32, СНО59-48, СНО59-56, СНО59-69, СНО59-96 and other CHO59 - the locally gilded plug depends on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Prices for connectors made before 1990, since 1990 -20%, since 2000 -40%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

Batteries must be removed!

Contacts of switches, relays made of silver alloy with the remnants of the holder, non-magnetic.
Holders must be cutted as close to the contact as possible, otherwise discounts may apply

Relay RPS20 - the price depends on the year of manufacture and the product passport - select in the tab.
Year of issue Content (gr.)
all passports up to 12.66 0,12 (Pt)
756, 760, 761, 762, 763 until 12.93. 0,12 (Au)
The markings, month and year of manufacture must be clearly legible. Relays without markings or with damaged markings are preliminarily analyzed or tested for suitability. When dismantling, be careful not to damage the marking of the relay for a more accurate and prompt calculation with you.
The content of precious metals in the RPS20 relay is shown in the table above.
We accept other relays RPS20 relays cheaper

Computer power supplies

GMI-27A lamp (pulse generator tetrode) until 1988 or with the number "5" in an star/romb
550 mg Au

Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

Connectors made in Bulgaria, Hungary, Poland, Czechoslovakia, GDR until 1990
These connectors were manufactured under the brands ELTRA, TESLA, RTF, TAN-2, etc.
They can be in different designs - fully or partially gold-plated.
Connectors must be free of wires and heavy fasteners

Large capacitors K52-②, K5②-2 (two in a circle), as well as without a rhombus (export version)

Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

KM capacitors on a ceramic base

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

K53-28 capacitors of any size.
The leads (legs) must be cut to fit the very case of the capacitor.

Relay RPS34 - the price depends on the passport and the year of manufacture of the product - select in the tab.
Passport Content (gr.)
231, 232, 233 before 12.91. 0,27 (Pt)
234, 235, 236 before 12.79. 0,16 (Pt)
The markings, month and year of manufacture must be clearly legible.
Relays without markings or with damaged markings are preliminarily analyzed or tested for suitability.
When dismantling, be careful not to damage the marking of the relay for a more accurate and prompt calculation with you.
The content of precious metals in the RPS34 relay is shown in the table above.
We accept other relays RPS34 relays cheaper

Relay RPS32 - the price depends on the passport and the year of manufacture of the product - select in the tab.
Passport Content (gr.)
201, 202, 203, 204, 205, 206, 207, 208 before 12.92. 0,14 (Pt)
209, 210, 211, 212, 213, 214, 215, 216 before 12.91. 0,14 (Au)
The markings, month and year of manufacture must be clearly legible.
Relays without markings or with damaged markings are preliminarily analyzed or tested for suitability.
When dismantling, be careful not to damage the marking of the relay for a more accurate and prompt calculation with you.
The content of precious metals in the RPS32 relay is shown in the table above.
We accept other relays RPS32 relays cheaper

Capacitors similar to k52-1 produced by "Tesla", Czechoslovakia
The leads (legs) must be cut to fit the very case of the capacitor

Capacitors similar to k52-1 non-USSR.
The leads (legs) must be cut to fit the very case of the capacitor

Switches PG2, PG5, PG7
The price depends on the year of manufacture, choose in the tab. After the specified years - check.
PG2 series switches were widely used in the Soviet radio-electronic industry. Most often, these products can be found in various radio stations of the Soviet period.
PG2 switches are one, two, three and four-section. The price for PG2 switches on the website is indicated for one section. Therefore, if you have PG2 with four sections, then the price will be quadrupled

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

Resistor SP5-35B up to 01.91.

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%

Resistor SP5-39A 0.5W to 01.92

PG43 switches
Price per section (two rows of contacts in one section)
ATTENTION! Prices for electronic elements manufactured before 1990 , since 90. -10%; since 2000 -20%!

Transistors P701, etc. without gilding we accept at the price of brass scrap

GMI-11 lamp (pulse generator tetrode) until 1988 or with the number "5" in an star/romb
550 mg Au

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

Note! When dismantling, keep the pins (legs) whole and unharmed!! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these elements on the boards, our specialists will remove them from the boards themselves, the price will not change for you downward

The price of connectors СНО60-18, СНО60-36, СНО60-54, СНО60-56, СНО60-72, СНО60-84 and other CHO60 - the locally gilded plug depends on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Prices for connectors made before 1990, since 1990 -20%, since 2000 -40%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company