Relay RPV5 / 7 until 01.1993., after - check.
We accept other RPV5 / 7 relays cheaper

Relay RES9 single passport
The price depends on the passport - select in the tab
year of manufacture until 01.1982.
Passport Year of issue Content (gr.)
201, 202, 207, 208 before 01.82. 0,16 (Pt)
213, 215, 216, 217, 218 before 01.82. 0,13 (Au)
In the RES9 relay, there are two types of passport (marking) of the relay: single, example of relay RES9 RS4524201 and separate, example 01 01.
How to determine the required single passport and the year of release of the RES9 relay is shown in detail in the photo.
The content of precious metals in the RES9 relay is different, depending on the relay passport, month and year of manufacture. Contacts are made of 999 gold, Pt-Ir-10 alloy and other less valuable alloys.
We buy these relays in any condition, new and used.
When dismantling from boards, try to keep the pins (legs) at the relay intact and in place. The price of the RES9 relay directly depends on this.
Also, do not damage the marking of the relay, which is located on the relay housing.
Other relays RES9 we accept cheaper

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

Connector prices before 1990., from 1990. -10%, from 2000. -20%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

Variable resistor (potentiometer) PTP-5
The price depends on the value of the nominal resistance (R) indicated on the nameplate - select the appropriate tab.
The number "5" in the marking "PTP-5" must be in the factory font, if it is squeezed out in the window - check!
The nameplate must indicate the year of manufacture of the product, others require verification проверки!
There are several resistors in one product - the price increases accordingly.

ATTENTION! Prices for electronic elements manufactured before 1990 , since 90. -10%; since 2000 -20%!

Switches TV1-2, TV1-4, VBT with a circuitсо схемой
The price depends on the execution, choose the tab.
Switches should have an image of an electrical circuit on the case, without a circuit - we accept it cheaper by weight.

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

Relay with silver contacts
Typically, relays that do not contain gold or platinum contacts have silver contacts.
We also buy these relays, including those produced NOT in the USSR / RF, but at a much lower price.
Price is per kilogram.
Silver-containing relays fall into two categories:
small and medium size weighing up to 50g / piece (RES 9, RES 10, RES 22, RES 15, RPS 34, etc.)
large size weighing over 50g / piece (RES 8, RPS, RP, RNK, RKM, etc.)

Variable resistor (potentiometer) PLP-2
The price depends on the value of the nominal resistance (R) indicated on the nameplate - select the appropriate tab.
The nameplate must indicate the year of manufacture of the product, others require verification проверки!
There are several resistors in one product - the price increases accordingly

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

Relay EMRV-27B-1

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When dismantling, keep the pins (legs) whole and unharmed!! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these elements on the boards, our specialists will remove them from the boards themselves, the price will not change for you downward

Reed relays RGK15 with whole yellow pins

Relay RV-5A all passports up to 1990 release.
We buy other RV-5A relays cheaper

Relay RES 7 passport any, any year of issue

Relay RES78 passport 00-13 year of issue before 01.90.
We accept other RES78 relays cheaper

2DS627, KDS627 and similar 16 pins, pink ceramics
ATTENTION! Prices for electronic elements manufactured before 1990 , since 90. -10%; since 2000 -20%!

ATTENTION! Prices for electronic elements manufactured before 1990 , since 90. -10%; since 2000 -20%!

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

Resistor SP5-4VA (double) up to 01.91

Lamp GU-43A (generator tetrode) until 1988 or with the number "5" in an star/romb
360 mg Au

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

GU-74B lamp (generator tetrode) until 1988 or with the number "5" in an star/romb
350 mg Au

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

Switches P2KnT1 up to 12.89.
Requires verification !!!!





<h2></h2>

Diodes GI401A, GI307A, KD110A and the similar.
ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

Ceramic processors with no feet or heavy metal plate

The price of connectors SNP58-18, SNP58-36, SNP58-54, SNP58-60, SNP58-72, SNP58-96 and other SNP58 - the locally gilded socket depends on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Prices for connectors made before 1990, since 1990 -20%, since 2000 -40%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

Lamp GMI-7, GMI-7-1 (pulse generator tetrode) until 1988 or with the number "5" in an star/romb
1200 mg Au

Relay RPS36 - the price depends on the passport and the year of manufacture of the product - select in the tab.
Passport Content (gr.)
251, 252, 253 before 12.91. 0,4 (Pt)
254, 255, 256 before 12.79. 0,3 (Pt)
The markings, month and year of manufacture must be clearly legible.
Relays without markings or with damaged markings are preliminarily analyzed or tested for suitability.
When dismantling, be careful not to damage the marking of the relay for a more accurate and prompt calculation with you.
The content of precious metals in the RPS36 relay is shown in the table above.
We accept other RPS36 relays cheaper

Relays RPS18 / 4, RPS18 / 5, RPS18 / 7 until 01.1990.
We accept other relays RPS18 / 4.18 / 5.18 / 7 cheaper

Relay RES10 unified passport
The price depends on the passport - select in the tab
year of manufacture until 01.1982.
Passport Year of issue Content (gr.)
300, 305, 308 before 01.82. 0,037 (Pt)
311, 316 before 01.82. 0,033 (Au)
301, 302, 303, 304 before 01.82. 0,065 (Pt)
312, 313, 314, 315 before 01.82. 0,06 (Au)
320 before 01.82. 0,06 (Au)
310 before 01.82. 0,065 (Pt)
Often, the RES 10 relays listed in the passport table above are also found after the indicated dates of manufacture. Such RES 10 relays require verification.
The content of precious metals in the RES10 relay depends on the passport, month and year of release of the relay.
In the marking of the RES10 relay, two types of passport are accepted: single, example PC4524303 and separate, example 031-11. How to determine the appropriate passport, month and year of release of the relay is shown in detail in the photo of the relay. Study and your questions about the price of the RES10 relay will disappear.
Pay special attention to the safety of the pins (legs) when removing the relay from the boards. In the absence of pins (legs), the price of the RES10 relay will significantly decrease, since the content of precious metals in the relay will decrease. You can not remove these relays from the boards, but send them together with a part of the board.
Our specialists dismantle the relay themselves, the price will not change downward from this. Also, during dismantling, do not damage the marking of the RES10 relay, the price of the relay directly depends on the marking on the relay case.
Other relays RES10 we accept a single passport cheaper

Switches PKn125, PKn150
Gold plated contacts inside.
ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

P1T4-1V switches.
The price depends on the year of manufacture, choose in the tab.
From 01.90 - check!
Switches are suitable only with the P1T4-1V marking.
With the marking P1T4-2V - these switches are not suitable

The price of connectors СНО60-18, СНО60-36, СНО60-54, СНО60-56, СНО60-72, СНО60-84 and other CHO60 - the locally gilded plug depends on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Prices for connectors made before 1990, since 1990 -20%, since 2000 -40%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

PPK2, PPK6 switches
Price for a contact group of 2 contacts
ATTENTION! Prices for electronic elements manufactured before 1990 , since 90. -10%; since 2000 -20%!

The price of connectors СНО60-18, СНО60-36, СНО60-54, СНО60-56, СНО60-72, СНО60-84 and other CHO60 - the locally gilded plug depends on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Prices for connectors made before 1990, since 1990 -20%, since 2000 -40%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

The price of connectors СНО63-18, СНО63-36, СНО63-54, СНО63-56, СНО63-72, СНО63-84 and other CHO63 - the locally gilded plug depends on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Prices for connectors made before 1990, since 1990 -20%, since 2000 -40%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

P1T3-1V switches.
The price depends on the year of manufacture, choose in the tab.
From 01.90 - check!
Switches are suitable only with the P1T3-1V marking.
With the P1T3-2V marking - these switches are not suitable