The price of connectors SNP58-18, SNP58-36, SNP58-54, SNP58-60, SNP58-72, SNP58-96 and other SNP58 - the locally gilded socket depends on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Prices for connectors made before 1990, since 1990 -20%, since 2000 -40%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

LCD boards

Low grade telecommunication boards telecommunication equipment boards with weights

Lamp GMI-7, GMI-7-1 (pulse generator tetrode) until 1988 or with the number "5" in an star/romb
1200 mg Au

Pd 28%

Relay RPS36 - the price depends on the passport and the year of manufacture of the product - select in the tab.
Passport Content (gr.)
251, 252, 253 before 12.91. 0,4 (Pt)
254, 255, 256 before 12.79. 0,3 (Pt)
The markings, month and year of manufacture must be clearly legible.
Relays without markings or with damaged markings are preliminarily analyzed or tested for suitability.
When dismantling, be careful not to damage the marking of the relay for a more accurate and prompt calculation with you.
The content of precious metals in the RPS36 relay is shown in the table above.
We accept other RPS36 relays cheaper

Relays RPS18 / 4, RPS18 / 5, RPS18 / 7 until 01.1990.
We accept other relays RPS18 / 4.18 / 5.18 / 7 cheaper

Products, plumbing, extruded mesh, tapes, pieces, dishes, wires, radiator caps, pipes from heat exchangers - 10% pollution.

Relay RES10 unified passport
The price depends on the passport - select in the tab
year of manufacture until 01.1982.
Passport Year of issue Content (gr.)
300, 305, 308 before 01.82. 0,037 (Pt)
311, 316 before 01.82. 0,033 (Au)
301, 302, 303, 304 before 01.82. 0,065 (Pt)
312, 313, 314, 315 before 01.82. 0,06 (Au)
320 before 01.82. 0,06 (Au)
310 before 01.82. 0,065 (Pt)
Often, the RES 10 relays listed in the passport table above are also found after the indicated dates of manufacture. Such RES 10 relays require verification.
The content of precious metals in the RES10 relay depends on the passport, month and year of release of the relay.
In the marking of the RES10 relay, two types of passport are accepted: single, example PC4524303 and separate, example 031-11. How to determine the appropriate passport, month and year of release of the relay is shown in detail in the photo of the relay. Study and your questions about the price of the RES10 relay will disappear.
Pay special attention to the safety of the pins (legs) when removing the relay from the boards. In the absence of pins (legs), the price of the RES10 relay will significantly decrease, since the content of precious metals in the relay will decrease. You can not remove these relays from the boards, but send them together with a part of the board.
Our specialists dismantle the relay themselves, the price will not change downward from this. Also, during dismantling, do not damage the marking of the RES10 relay, the price of the relay directly depends on the marking on the relay case.
Other relays RES10 we accept a single passport cheaper

Switches PKn125, PKn150
Gold plated contacts inside.
ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

With small or metal sockets;
aluminum cells and batteries removed;
Sockets: A; 478; 775; 1155; 1156; 1366; 939; 754; AM2; AM3; AM2 ; AM3 and younger

Control boards from measuring and computing devices made in the USSR

Mobile phones with buttons

P1T4-1V switches.
The price depends on the year of manufacture, choose in the tab.
From 01.90 - check!
Switches are suitable only with the P1T4-1V marking.
With the marking P1T4-2V - these switches are not suitable

The price of connectors СНО60-18, СНО60-36, СНО60-54, СНО60-56, СНО60-72, СНО60-84 and other CHO60 - the locally gilded plug depends on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Prices for connectors made before 1990, since 1990 -20%, since 2000 -40%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

PPK2, PPK6 switches
Price for a contact group of 2 contacts
ATTENTION! Prices for electronic elements manufactured before 1990 , since 90. -10%; since 2000 -20%!

The price of connectors СНО60-18, СНО60-36, СНО60-54, СНО60-56, СНО60-72, СНО60-84 and other CHO60 - the locally gilded plug depends on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Prices for connectors made before 1990, since 1990 -20%, since 2000 -40%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

The price of connectors СНО63-18, СНО63-36, СНО63-54, СНО63-56, СНО63-72, СНО63-84 and other CHO63 - the locally gilded plug depends on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Prices for connectors made before 1990, since 1990 -20%, since 2000 -40%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

P1T3-1V switches.
The price depends on the year of manufacture, choose in the tab.
From 01.90 - check!
Switches are suitable only with the P1T3-1V marking.
With the P1T3-2V marking - these switches are not suitable

PD27-1 switches.
Gold plated contacts inside.
ATTENTION! Prices for electronic elements manufactured before 1990 , since 90. -10%; since 2000 -20%!

Switches PT8-1V, PT8-3V up to 12.82 two yellow pins, after - check!
Twin for double the price

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

KDS628A and similar 12 pins, pink ceramics
ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

Price depends on grade. Б-83, Б16, Б6

Sn 30%, Sn 40%, Sn 60%, Sn 90%, Sn 99%

Without HDD, Partially dismantled, Full set

Uninterruptible power supplies

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!

ATTENTION! Prices for radio parts manufactured before 1990, from 1990. -10%!

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

ATTENTION! Prices for electronic elements manufactured before 1990. , since 90. -10%; since 2000. -20%!
Note! When removing the microcircuits, keep the pins (legs) whole and unharmed! If you do not succeed in high-quality dismantling, then entrust this business to professionals. Send or bring these microcircuits on the boards, our specialists will remove the parts from the boards themselves, the price will not change for you downward

The price of connectors СНО54-18, СНО54-36, СНО54-54, СНО54-56, СНО54-60, СНО54-135 and other CHO54 - the locally gilded plug depends on the number of contacts - choose the appropriate tabs!
If you did not find a tab with the number of pins corresponding to your connector, select the "1 pin" tab and multiply by the number of pins in your connector.
Prices for connectors made before 1990, since 1990 -20%, since 2000 -40%
When removing the connector, keep the markings on the housing intact and undamaged. The price of the connector depends on this, since there is a month and a year of product release on the case. All connectors with damaged markings, where the year of manufacture is not visible, are counted as from 1990 onwards. Some, as from 2000 release. You do not have to solder or break the connector out of the board, but carefully cut it along the board, along with a part of the board, and in this form bring or send by parcel to our company

Variable resistor (potentiometer) PPML-M
The price depends on the markings on the case, choose the tab.
The manufacturer's logo is cast on the body of the product. All others require verification!

Switch SHIV50 / 2, SHIV50 / 4, SHIV25 / 2, SHIV25 / 4 white shiny plates. ShIV50 switches with copper-colored plates - not suitable

Microcircuits of the 155 series and the like in a plastic case must be sorted into large (2DIM format - wide) and small size (1DIM format - narrow) and cut for the checking of gilding inside.
Further, the microcircuits of each size must be sorted:
- gold plated plate and partially gold plated pins
- the plate is white, the pins are partially gilded
- no visible gilding
If there is a batch of microcircuits with the same markings, release date and manufacturer, it is not necessary to bite through all the microcircuits.
For unsorted batches of microcircuits, the price is determined by the receiver by taking samples from the batch.

Resistor SP5-1VA, VB aluminum plate up to 01.91

Resistor SP3-37A, B up to 01.91

Resistor SP5-20VB up to 01.90.